Phaser Settings
| Discharge Energy Index | SEM:NDF Ratio | Damage Index | Notes | |
|---|---|---|---|---|
| Setting 1: Light Stun | 15.75 | N/A | 0 | •This setting is calibrated for base humanoid physiology, and causes temporary central nervous system (CNS) impairment resulting in slight daze but not unconsciousness. •Higher levels of reversible damage to the CNS result from repeated long exposures. •The discharge energy index is related to Rapid Nadion Effect (RNE) protonic charge levels. •Standard composite structural materials of median-density (consisting typically of multiple layers of tritanium, duranium, cortenite, lignin, and lithium-silicon-carbon 372) are not permanently affected, although some warming (from vibration) will be detected. |
| Setting 2: Medium Stun | 45.30 | N/A | 0 | •Base-type humanoids remain unconscious for up to 15 minutes. •Long exposures produce low levels of irreversible damage to the CNS and epithelial layers. •Structural materials are not affected, though higher levels of vibrational warming are evident. |
| Setting 3: Heavy Stun | 160.65 | N/A | 1 | •Deep sleep for up to 1 hour •Single discharges raise 1cc of liquid water by 100ºC *Structural samples experience significant levels of thermal radiation |
| Setting 4: Low Thermal Effects | 515.75 | N/A | 3.5 | •Base-type humanoids experience extensive CNS damage and epidermal electromagnetic (EM) trauma •Structural materials exhibit visible thermal shock •Discharges of longer than five seconds produce deep heat storage effects within metal alloys |
| Setting 5: High Thermal Effects | 857.5 | 250:1 | 7 | •Humanoid tissues experience severe burn effects but (due to water content) deeper epithelial layers will not char |
| Setting 6: Light Disruption Effects | 2700 | 90:1 | 15 | •Organic tissues and structural materials exhibit comparable penetration and molecular damage as high energy causes matter to undergo rapid dissociation •The 'familiar' thermal effects begin to decrease at this level |
| Setting 7: Moderate Disruption Effects | 4900 | 1:1 | 50 | •Organic tissue damage causes immediate cessation of life processes as disruption effects become widespread |
| Setting 8: Medium Disruption Effects | 15000 | 1:3 | 120 | •Cascading disruption forces cause humanoid organisms to vaporise, as 50% of affected matter transitions out of the continuum •All unprotected matter is affected and penetrated according to depth and time of application |
| Setting 9: High Disruption Effects | 65000 | 1:7 | 300 | •Medium alloys and ceramic structural materials (of over 100 cm thickness) begin exhibiting energy rebound prior to vaporisation |
| Setting 10: Extreme Disruption Effects | 125000 | 1:9 | 450 | •Heavy structural materials absorb or rebound energy; there is a 0.55 second delay before material vaporises |
| Setting 11: Slight Explosive/Disruption Effects | 300000 | 1:11 | 670 | •Structural materials utilising ultradense alloys absorb or rebound energy with a 0.20 second delayed reaction before vaporisation •Light geological displacement, as approximately 10 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
| Setting 12: Light Explosive/Disruption Effects | 540000 | 1:14 | 940 | •Structural materials utilising ultradense alloys absorb or rebound energy with a 0.1 second delayed reaction before vaporisation •Moderate geological displacement, as approximately 50 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
| Setting 13: Moderate Explosive/Disruption Effects | 720000 | 1:18 | 1100 | •Shielded matter exhibits minor vibrational heating effects •Medium geological displacement, as approximately 90 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
| Setting 14: Medium Explosive/Disruption Effects | 930000 | 1:20 | 1430 | •Shielded matter exhibits medium vibrational heating effects •Heavy geological displacement, as approximately 160 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
| Setting 15: High Explosive/Disruption Effects | 1.17 x 106 | 1:25 | 1850 | •Shielded matter exhibits major vibrational heating effects •Extreme geological displacement, as approximately 370 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
| Setting 16: Extreme Explosive/Disruption Effects | 1.55 x 106 | 1:40 | 2450 | •Shielded matter exhibits light mechanical fracturing •Catastrophic geological displacement, as approximately 650 m3 of rock (of average density 6.0 g/cm3) is explosively decoupled by a single discharge |
SEM:NDF Ratio: Simple Electromagnetic:Nuclear Disruption Force
Damage Index: A standardized damage index is derived for setting comparisons: each whole number represents the number of centimetres of material penetrated or damaged at the molecular level.
Wide Angle Beam
It is possible for some beam type phaser weapons to a wide angle beam. This causes the phaser beam to be spread over a wide area, as opposed to a narrow beam, by realigning the emitter crystal. The advantage of this is that multiple targets can be neutralised at once. However, there are multiple set backs. The beam which is emitted from the phaser is not as powerful as a single shot would be. As such the phaser often needs to be set to a higher setting to compensate. This in turn has a significant effect upon the power consumption causing power cells to be depleted quicker.
Setting Phaser to Overload
It is possible to set a phaser so that it discharges all of its energy in one large explosion. This is not a standard feature of any Starfleet phaser and thus is not recommended. However, by removing a phasers safety interlock and then manually realigning the emitter crystal so that the beam is reflected back into the power cell a phaser will start to overload. The overload will be accompanied by a high pitch whine. Energy will build up in the power cell and after roughly 20 seconds the power containment will be breached resulting in an explosion the size of which is dependent upon how much power is left in the cell.